Ultrak CCU-100HD Manual do Utilizador descarregar pdf (Página 36)

2-12

2.3.2.2 Rear Panel Connector Pin-Out Assignments

a. Channels One through Eight - Channels one through eight on the

rear panel are 6-pin DIN connectors, part number 842372-0591.

The mating 6-pin connector plugs, part number 842374-0591, are

supplied with the unit.

CHANNELS 1 THROUGH 8 PIN ASSIGNMENTS

Pin 1 TX- Outputs data to JPD-100 Controllers,

FastScan assemblies, SmartScan

assemblies, Control Receivers, AIU-

100s, and SHB-100s

Pin 2 TX+ Outputs data to JPD-100 Controllers,

FastScan assemblies, SmartScan

assemblies, Control Receivers, AIU-

100s, and SHB-100s

Pin 3 GND Connects to cable shield

Pin 4 RX+ Inputs data from JPD-100 Joystick

Controllers, AIU-100s, SHB-100s

Pin 5 RX- Inputs data from JPD-100 Joystick

Controllers, AIU-100s, SHB-100s

Pin 6 5 Vdc Optional - can be supplied through

connector J13 on the printed circuit

board.

NOTE

If the receive (input) port is not used on

channels one through four and six through

eight, it is recommended the termination

resistor for that channel be disabled. To

disable a resistor, remove the jumper for that

resistor.

Termination

Channel Resistor Jumper

1R13W34

2R14W35

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 153 154

Sem comentários

Ultrak CCU-100HD Manual do Utilizador Página 36