Ultrak CCU-100HD Manual do Utilizador descarregar pdf (Página 26)

2-2

2.2.1.1 DIP Switches (S1-S4) for Communication Settings

The circuit board inside the CCU chassis has four DIP Switches, S1

through S4, for setting the baud rate, odd/even parity, and enable or

disable receive/transmit for channels one through eight. Each switch

supports two channels. Switch S1 sets channels 1 and 2, switch S2 sets

channels 3 and 4, switch S3 sets channels 5 and 6, and switch S4 sets

channels 7 and 8 (COM1 and COM2). Switch positions 1 and 2 set the

baud rate for channels 2, 4, 6, and 8. Switch positions 4 and 5 set the

baud rate for channels 1, 3, 5, and 7. Switch positions 3 and 7 set the

parity (even, odd, none) for channels 2, 4, 6, and 8. Switch position 6

sets the parity (even or odd) for channels 1, 3, 5, and 7. No parity is not

available for channels 1, 3, 5, and 7.

Channels 2, 4, 6, and 8

Baud Rate Sn-1 Sn-2

1200 ON ON

2400 OFF ON

9600 ON OFF

19.2K OFF OFF

n = 1 for channel 2, n = 2 for channel 4, n = 3 for channel 6, n = 4 for channel 8

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 153 154

Sem comentários

Ultrak CCU-100HD Manual do Utilizador Página 26